Bakken Rigs Reduce to 66

Bakken Rig Count Remains Steady
akken Rigs

The Bakken-Three Forks rig count dropped to 66 rigs running across our coverage area by end of the week on Friday.

In recent Bakken news, production in the Bakken Shale play decreased over the summer according to the Energy Information Administration’ s latest Drilling Productivity Report.

Read more:EIA: Bakken Production Declines

The U.S. rig count fell by four this week, ending with 838 rigs running by midday Friday.  A total of 194 rigs were targeting natural gas (down four from previous week) and 640 were targeting oil in the U.S. (one less than the previous week). The remainder were drilling service wells (e.g. disposal wells, injection wells, etc.)70 are in ND alone.

Bakken Oil & Gas Rigs

The Bakken oil rigs were at 66 this week with Bloomberg reporting WTI oil prices trading at $45.7/bbl on Friday afternoon. WTI-Brent decreased $.06 landing to $48.60. The Bakken has zero natural active gas rig in the area this week with futures increasing slightly to $2.56/mmbtu by midday.

McKenzie County continues to lead development at 25 rigs this week, far outpacing other counties. View the full list below under the Bakken Drilling by County section.

Activity continues to be dominated by horizontal drilling:

  • 62 rigs are drilling horizontal wells
  • 1 rigs are drilling directional wells
  • 3 rigs are drilling vertical wells

Be sure to visit our Bakken Job Listings to search openings and come back weekly for updates or sign up for alerts - Daily or Weekly Email Alerts

Bakken Drilling by County

 

Bakken Oil & Gas News

Pope Francis Challenges U.S. on Climate Change

Continental Sidelines Bakken Rigs

What is the Rig Count?

The Bakken Shale Rig Count is an index of the total number of oil & gas drilling rigs running across Montana and North Dakota. The rigs referred to in this article are for ALL drilling reported by Baker Hughes and not solely wells targeting the Bakken formation. All land rigs and onshore rig data shown here are based upon industry estimates provided by the Baker Hughes Rig Count.

Read more at bakerhughes.com

Bakken Rig Count at 69

Bakken Rig Count Remains Steady
akken Rigs

The Bakken-Three Forks rig count dropped to 69 rigs running across our coverage area by end of the week on Friday.

In recent Bakken news, North Dakota senator, Heidi Heitkamp, pushes back against the latest federal mandate to reduce methane emissions.

Read more:Heitkamp Reacts to Methane Ruling

The U.S. rig count fell by 16 this week, ending with 848 rigs running by midday Friday.  A total of 196 rigs were targeting natural gas (down six from previous week) and 652 were targeting oil in the U.S. (10 less than the previous week). The remainder were drilling service wells (e.g. disposal wells, injection wells, etc.)70 are in ND alone.

Bakken Oil & Gas Rigs

The Bakken oil rigs were at 69 this week with Bloomberg reporting WTI oil prices trading at $45.19/bbl on Friday afternoon, a $1.59 decrease from the previous week. WTI-Brent decreased $.1.69 landing to $48.66. The Bakken has zero natural active gas rig in the area this week with futures increasing slightly to $2.70/mmbtu by midday.

McKenzie County continues to lead development at 22 rigs this week, while Williams (14), Dunn (13) and Mountrail (13) followed behind. View the full list below under the Bakken Drilling by County section.

Activity continues to be dominated by horizontal drilling:

  • 66 rigs are drilling horizontal wells
  • 0 rigs are drilling directional wells
  • 3 rigs are drilling vertical wells

Be sure to visit our Bakken Job Listings to search openings and come back weekly for updates or sign up for alerts - Daily or Weekly Email Alerts

Bakken Drilling by County

Bakken Oil & Gas News

Shale Industry Loses Billions

Heitkamp Reacts to Methane Ruling

What is the Rig Count?

The Bakken Shale Rig Count is an index of the total number of oil & gas drilling rigs running across Montana and North Dakota. The rigs referred to in this article are for ALL drilling reported by Baker Hughes and not solely wells targeting the Bakken formation. All land rigs and onshore rig data shown here are based upon industry estimates provided by the Baker Hughes Rig Count.

Read more at bakerhughes.com

Bakken Rig Count Falls to 70

Bakken Rig Count Remains Steady
akken Rigs

The Bakken-Three Forks rig count dropped to 70 rigs running across our coverage area by end of the week on Friday.

In recent Bakken news, a former operator of a saltwater well in southwest North Dakota, was indicted on 13 federal counts and fined a record $1.5 million in 2013 for putting drinking water at risk by illegally dumping more than 800,000 gallons of salty, oilfield wastewater into a former oil well in Stark County.

Read more: Former Bakken Operator Pleads Not-Guilty

The U.S. rig count fell by 13 this week, ending with 864 rigs running by midday Friday.  A total of 202 rigs were targeting natural gas (same as previous week) and 662 were targeting oil in the U.S. (13 less than the previous week). The remainder were drilling service wells (e.g. disposal wells, injection wells, etc.)71 are in ND alone.

Bakken Oil & Gas Rigs

The Bakken oil rigs were at 70 this week with Bloomberg reporting WTI oil prices trading at $46.62/bbl on Friday afternoon, a $1.63 increase from the previous week. WTI-Brent increased $.33 landing to $50.35. The Bakken has zero natural active gas rig in the area this week with futures increasing slightly to $2.66/mmbtu by midday.

McKenzie County continues to lead development at 22 rigs this week, while Williams (14), Dunn (13) and Mountrail (13) followed behind. View the full list below under the Bakken Drilling by County section.

Activity continues to be dominated by horizontal drilling:

  • 66 rigs are drilling horizontal wells
  • 1 rigs are drilling directional wells
  • 3 rigs are drilling vertical wells

Be sure to visit our Bakken Job Listings to search openings and come back weekly for updates or sign up for alerts - Daily or Weekly Email Alerts

Bakken Drilling by County

 

Bakken Oil & Gas News

Texas Rancher Wins Back Royalty Payments

Crude Prices & the Stock Market: A Wild Ride

What is the Rig Count?

The Bakken Shale Rig Count is an index of the total number of oil & gas drilling rigs running across Montana and North Dakota. The rigs referred to in this article are for ALL drilling reported by Baker Hughes and not solely wells targeting the Bakken formation. All land rigs and onshore rig data shown here are based upon industry estimates provided by the Baker Hughes Rig Count.

Read more at bakerhughes.com

Bakken Rig Count Stays Flat

Bakken Rig Count Remains Steady
akken Rigs

The Bakken-Three Forks rig count remained at 71 rigs running across our coverage area by end of the week on Friday.

In recent Bakken news, Bentek Energy reported a slight increase in oil production for North Dakota in July, saying that the Bakken formation follows closely behind the Eagle Ford Basin in terms of efficiency gains and internal rates of return. Drill times in the Bakken dropped from about 15 days per well in late 2014 to about 13 days per well during the second quarter of this year.

Read more: Bakken Oil Production Up Slightly

The U.S. rig count decreased by eight, ending with 877 rigs running by midday Friday.  A total of 202 rigs were targeting natural gas (nine less than the previous week) and 675 were targeting oil in the U.S. (one more than the previous week). The remainder were drilling service wells (e.g. disposal wells, injection wells, etc.)72 are in ND alone.

Bakken Oil & Gas Rigs

The Bakken oil rigs were at 71 rigs this week with Bloomberg reporting WTI oil prices trading at $44.99/bbl on Friday afternoon, a $4.54 increase from the previous week. WTI-Brent increased $4.56 landing to $50.02. The Bakken has zero natural active gas rig in the area this week with futures increasing slightly to $2.71/mmbtu by midday.

McKenzie County continues to lead development though falling to 22 rigs this week, while Williams (14) and Dunn (13) followed behind. View the full list below under the Bakken Drilling by County section.

Activity continues to be dominated by horizontal drilling:

  • 68 rigs are drilling horizontal wells
  • 1 rigs are drilling directional wells
  • 2 rigs are drilling vertical wells

Be sure to visit our Bakken Job Listings to search openings and come back weekly for updates or sign up for alerts - Daily or Weekly Email Alerts

Bakken Drilling by County

 

Bakken Oil & Gas News

Montana Delays Decision on Drilling Buffers

Montana Mineral Owners Receive Low-Ball Offers from Federal Government

What is the Rig Count?

The Bakken Shale Rig Count is an index of the total number of oil & gas drilling rigs running across Montana and North Dakota. The rigs referred to in this article are for ALL drilling reported by Baker Hughes and not solely wells targeting the Bakken formation. All land rigs and onshore rig data shown here are based upon industry estimates provided by the Baker Hughes Rig Count.

Read more at bakerhughes.com

Bakken Rig Count at 71

The Bakken-Three Forks rig count increased to 71 rigs running across our coverage area by end of the week on Friday. In recent Bakken news, crude oil has fallen to a six year low in recent weeks, but even at the current price of around $43, analysts speculate the Bakken will remain strong.  

Read more: Can Bakken Break Even at $30?

The U.S. rig count increased by one, ending with 885 rigs running by midday Friday.  A total of 211 rigs were targeting natural gas (the same as the previous week) and 674 were targeting oil in the U.S. (two more than the previous week). The remainder were drilling service wells (e.g. disposal wells, injection wells, etc.)  72 are in ND alone.

Bakken Oil & Gas Rigs

The Bakken oil rigs were at 71 rigs this week with Bloomberg reporting WTI oil prices trading at $40.45/bbl on Friday afternoon, a $1.68 decrease from the previous week. WTI-Brent decreased $3.57 landing to $45.46. The Bakken has zero natural active gas rig in the area this week with futures decreasing to $2.68/mmbtu by midday.

McKenzie County continues to lead development and is running 26 running this week, while Williams (15) and Mountrail (12) followed behind. View the full list below under the Bakken Drilling by County section.

Activity continues to be dominated by horizontal drilling:

  • 61 rigs are drilling horizontal wells
  • 1 rigs are drilling directional wells
  • 2 rigs are drilling vertical wells

Be sure to visit our Bakken Job Listings to search openings and come back weekly for updates or sign up for alerts - Daily or Weekly Email Alerts

Bakken Drilling by County

Bakken Oil & Gas News

New Ruling to Slash Methane Emissions

Montana Mineral Owners Receive Low-Ball Offers from Federal Government

What is the Rig Count?

The Bakken Shale Rig Count is an index of the total number of oil & gas drilling rigs running across Montana and North Dakota. The rigs referred to in this article are for ALL drilling reported by Baker Hughes and not solely wells targeting the Bakken formation. All land rigs and onshore rig data shown here are based upon industry estimates provided by the Baker Hughes Rig Count.

Read more at bakerhughes.com